I have a 2013 Sundancer 310. Any...
I have a 2013 Sundancer 310. Any good source for bow cushions?
I have a 2013 Sundancer 310. Any good source for bow cushions?
I have a 1999 Sundancer 400 that needs a new AC raw water pump and the label on the old one is in pretty bad shape so I can’t read the specs! Does anyone know the proper replacement? Also need a resource for the hydralic cylinders for the swim platfo...
Hi Everyone, I have a 2008 230 Select. While the top of my carpets are in good shape, the bottom black rubber foam-like material is disintegrating in some areas and leaving small black granules on the floor. Does anyone have a way to repair the bot...
Hi everyone I have a 2000 270 Sundancer with the 7.4 bravo 3 ever since I bought it the steering was always stiff I replaced power steering pump actuator cable is good still is stiff any ideas I would appreciate thank you
Hi all,I own a 1998 290 Sundancer and I recently pulled the westerbeke gen set out to have the backend repaired. The wires for the remote panel were removed without taken a picture or writing the sequence down. I have 6 wires that go to the generat...
Hello everyone. I own a 2001 400DB and want to replace or fix the laminate on the cabinetry. The boat is located in Marina Del Rey and if anyone knows of a good company or tradesman in the area to take a look I would appreciate a reference.
Hello everyone! I have a serious problem I need help with. The port fuel cell on my 86 410 Aft Cabin seems to be leaking. I say "seems" because I'm not quite sure. I've tracked the slow drip to the tank but can't see an damage or corrosion anywhe...
We have a 1997 185BR. Where could I find or have the bucket seats and rear bench seat backrest covers fabricated or ready made with the SeaRay emblem? This boat is 95 percent restored and those are throwing a monkey wrench in the works. ...
I have a 1996 250 Sundancer and trying to have all the seats reupholstered. How do you get the backrest(facing toward the bow) off on the port side chaise seating? I took the 2 long screws out on the 2x2 ft panel in the cabin, but the panel doesn't ...