Sea Ray

Thanks. I tried that but it didn't work. I'm thinking I may have to unscrew and remove the black track filler on the top to allow that to work?

It makes HUGE sense that there would be a secondary retention method on a boat, so it doesn't flop out from movement while underway.

My po did this. I don’t know what he did but he did say it was a total pita to do . I can’t even get the flyscreen out as that needs work . Sometimes the wheels on sliding doors can be adjusted from either end with a Phillips screwdriver, to retract them into the door frame thereby permitting the up and out method , as the wheels then don’t foul the track. Not sure if this works on searay doors .

Thanks! I figured it out. I removed the 5 Phillips screws holding the plastic track filler at the top. Once that is out then the door can be lifted off the track. I was able to put the door bar back on and then put the door back on the tracks after cleaning everything while I had it out. It was simple in the end.

thanks for the detail, i'll save this for when I have to do it. glad to hear my fears were unfounded