cancel
Showing results for 
Search instead for 
Did you mean: 

Me again with yet another question...

FFFFAST
Guest Contributor

Me again with yet another question re: my 2006 Sundancer 44. Can anyone tell me what model Vacuflush toilet is most likely in the forward head?  I have the owner's manual which lists nine variations of models 500 Plus, 1000 Series and Model 706.  I took measurements of the toilet attempting to compare with the "Dimensional Specifications" in the manual, yet unable to tell for sure which one it is. I can't find any where on the toilet a label indicating model/serial number. Thanks 

10 REPLIES 10

captsteve
Guest Contributor
under the bowl should be removeable cover and model number should be on a tag. at lease thats were mine is

FFFFAST
Guest Contributor
Thanks captsteve— I had removed that cover, unfortunately no tags anywhere.

CurtP
Guest Contributor
My 2006 44 forward toilet is a model 1006...

FFFFAST
Guest Contributor
CurtP- Thank you for suggesting the 1006. That is one of the ones I had identified as being a potential. The only question I have, if you have access to measure your seat/lid across -- mine is about 13 1/2" wide. The specs indicate it should be about 17", including the flush pedal, which I can't measure, since mine is missing -- that is what I am attempting to replace. Again, appreciate your helping out -- trying to bring my boat back to tiptop condition.

Big_Dog
Guest Contributor
Nice! 2006 44ft Dancer. You may have a few dollars left for a mechanic or inspector to walk you through your boat. Better yet a 12 pack and the right boat guy and your in the know!

FFFFAST
Guest Contributor
Hi Big Dog -- fortunately I do have a few bucks left over as well as multiple 12 packs to provide to those helpful souls. For the short period of time I have owned the boat, I am learning tons about it. As most of us boaters are aware the written documentation covering the technical aspects of our joys and pleasurecrafts leave a bit to be desired. I am coming from owning my 33 Dancer for 20 years, so there is a huge educational gap which exists at the moment. 🙂

Alumofcu
Guest Contributor
I'll check mine. I've got a 500 DA but I suspect, they are the same.

Alumofcu
Guest Contributor
Here’s a picture of the vacu pump on mine. Make sure you take those little guys apart and clean them and replace the duck valves in them. Each one takes four valves typically.

Alumofcu
Guest Contributor
Base to my vacuflush. 500DA

Alumofcu
Guest Contributor
BTW, i have 2 heads on my vessel so the connection is a little different but this is covered in the installation manual. Attached is a pic where I had to cut access to the crew pump as Sea Ray didn't grant me any.