cancel
Showing results for 
Search instead for 
Did you mean: 

Mercury engine, keeps shredding...

Guye926
Guest Contributor
Mercury engine, keeps shredding serpentine belts. 4 different mechanics have not solved it. Appears to start walking at the water pump but have already changed that out, plus added new idler pulley. Have also used straight edge to align. Just checking in case anyone else might have encountered the same mystery.
4 REPLIES 4

wingless
Rising Contributor
The question only needs to be posted once.

This page shows how to use a straight edge to verify alignment.

https://www.cartechbooks.com/techtips/serpbelt/

The tension must be correct. Mine is manually set and verified per the FSM.

The belt and pulleys must be correct (match) each other.

Big_mike1
Guest Contributor
It’s the crank shaft pulley the hub in the middle walks replace the pulley and u will be all set common issue

Big_mike1
Guest Contributor
Very hard to find by the way

Guye926
Guest Contributor
Thanks Mike, trying to get a part number