I purchased a Garman Sticker VIVD 4 with a ClearVu Transducer for my 2004 Sea Ray which already has a thru hull transducer for the SmartCraft.Planned to mount the ClearVu transducer inside the hull with epoxy. Concerned frequency compatibility betwee...
I recently added Merc's VesselView mobile to my 2015 19 SPX with the 220 HP engine. There is a significant discrepancy between the boats tach and the RPM reported by VesselView. At idle the Tach shows around 900 RPM and VesselVeiw shows about 620. At...
I have a 2001 240 Sundancer with a 5.0 Mercruiser. While cruising at approx 26mph she suddenly loses power and I can’t get her over 10mph. This happens from time to time. Anyone know what might be happening here?
I am the proud owner of a 2000 Sea Ray 230 Signature Bow Rider. I recently upgraded the Bravo 1 outdrive to a Bravo 3 outdrive. The way that I came to this upgrade is an unfortunate story. I ran my boat hard onto a submerged rock pile. The impact was...
2011 Sundek 200 Thinking about adding a Wake Tower to appease the Grand Kids. Any thoughts, suggestions. recommendations or manufacture's I should consider. Also looking for a good trailerable cover to keep from losing things on the highway.Thanks
Hi all. New member in need of assistance. Have a 2009 290 Sundeck. Was lifting the transom tabletop, and suddenly a bunch of small white plastic rods fell out of the locking mechanism at the base of the post. Still locks, but now loose and wobble...
Hello,I am looking for a swim ladder for a 2004 SeaRay Sundeck 240. The manufacturer G.G. Schmitt & Sons does not sell direct any more. Would any of you have a used swim ladder or at least the mid and bottom part? This is the part number: 1473750 LA...
1997 SeaRay 185 I have a 23 pitch prop great for speed but want to pull a tube any suggestions on prop pitch I have a 21 just not really sure don't want to hurt the motor.
I recently purchased a 2002 Sea Ray Model 200 Bowrider from a private seller who did not have a boat manual for it. Does anyone have such a boat and such a manual? If so, can it be copied at my expense and sent to me?. Thanks Steve Schneiderstep...
