My boat is a 2002 460. A previous owner enlarged the opening for the cockpit radio/cd player. I have purchased a Clarion 660 to replace the Pioneer that is very broken. The hole is about an inch too large in height, so I need to find a suitable ba...
Raymarine Digital Radar Problem;All was working fairly well.... then Radar system stopped communicating with Dome. Raymarine tech came 2x already the 1 st visit he installed all new everything in Radar dome and updated program except motor (motor tes...
I own a 1995 SeaRay Sundancer model 450, and was wondering if anyone had experience with installing a water system on their boat. I want to eliminate the water tank and draw water from the lake. As I boat in the Great Lakes, I have no need for a sali...
I have a 1995 440 Sundancer and am suffering with leaking bow hatches. What can I do to solve this problem?
I have a 2003 420 Sundancer. My Raymarine 230 needs a complete rebuilt or replacement. I would replace it but have heard that the electrical bridles on the newer VHF's will not connect to my 2003 system. Any thoughts? Ritz Sea
I have a 2018 Sundancer 400. Wonderful vessel, barely had it 2 months and it runs like a dream. I have recently had issues with line noise in the Fosgate speakers over the back patio. I can't figure out if it might be a grounding issue or a short in ...
I have read several post on how to access to the wiper motor on a 45 Sundancer on port side. On my D450 it is located in an access panel above the fluorescent light port side in the galley. You will have to remove the light to gain access.
I have a 1995 450 Sundancer that after running for a bit, will not restart. Upon investigation it appears the Seafire fire suppression system is the culprit. We put the switch over to bypass and the engines would start, but eventually we changed the ...
2006 44 Dancer galley flip down TV mechanism needs repairs. Any direction on removing the surrounding headliner?
I need to replace the splendide 2000s washer/ dryer combo on ny 2008 48DA Sundancer. Does anyone know how to remove the door jam to the mid-berth to make access to remove the old unit and bring in its replacement?
