This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

I’m having problem with the auto...

Capt__Pete
Guest Contributor

‎12-30-2019 01:55 PM

I’m having problem with the auto pilot on my 2003 sedan bridge 400. It is probably the rudder control sensing unit. It should be mounted on or near the rudder tie bar or a similar location. It looks to me like I will have to pull the generator to get to it.  Am I missing something?

0 Likes
3 REPLIES 3

wingless
Rising Contributor

‎12-30-2019 03:47 PM

Yes, the rudder sensor must be connected to the steering.

This image shows my 2000 380DA steering and rudder sensor.


https://live.staticflickr.com/4761/38697332810_87a72989fb_c.jpg
0 Likes

Capt__Pete
Guest Contributor

‎12-30-2019 05:34 PM

Thanks Wineglass. I was afraid that was the case. Good excuse to clean up the rusty tray under the generator.
0 Likes

Capt__Pete
Guest Contributor

‎12-31-2019 09:43 AM

I just had a pro to the boat to replace the sensor. Turns out that he can easily access the rudder connection behind the battery bank on the port side. He’ll replace the unit and I’m good to go.
0 Likes
Copyright © 2024 Khoros, LLC