Those constant on breakers bypass...
Those constant on breakers bypass the battery switch. The systems they control are always on when batteries are connected for our safety. I.e.: emergency bilge and others
Those constant on breakers bypass the battery switch. The systems they control are always on when batteries are connected for our safety. I.e.: emergency bilge and others
QUESTION ON DC MAIN ELECTRICAL PANEL …..New owner of a 2001 Sea Ray 280 SS: I have noted that all the breaker rocker switches on the panel are locked in the “On” position. A picture is attached. I cannot flip the rocker switches to the off position. ...
I have a 2013 260 Dancer and I am getting a lost engine com error message and none of the guages are working. Any suggestions on what the problem could be?
My 2000 380DA has a sliding / telescoping ladder within the swim platform, under a door. There are metal parts between each of the three U-shaped telescoping ladder rungs. On my boat the metal parts deteriorated. Some parts fell off, other parts fail...
Thank you kindly, went to site and found just what I was looking for.
Yes I need the front and rear arch shades for a 290 Sea Ray bowrider
Have a 2004 290 bowrider looking for sun shade and rear shade for arch, is there a premade set to purchase or any good used sets
I replaced my raw water pump on my 2005 Searcy 270 Amberjack with Mecruiser 496 Magazine engine. One of the air fittings on the pump was cracked. I replaced it. Now I have a black hose coming from the top of the pump (above the air fittings) and I do...
2001 - 380 SeaRay aft cabin. Prop Pitch and Prop Specs Needed: Does anyone out there know what the prop pitch is for this boat and the recommended size of props. I cant find this information anywhere,Engine: VD-8.1 S MerCruiser® (T-370 hp - 276 kW) ...
We just bought a 2010 SR 390 Sundancer. We have the standard canvas package that came from the factory. The first question is that the hardtop is about a foot short in the front and without the front canvas in the windshield, it rains on to the hel...