Showing results for 
Search instead for 
Did you mean: 

1994 330DA Grab rail head/shower wall

Guest Contributor

Hello all, I have a 1994 330DA. The shower grab rail came loose from the shower wall in the head. The bolt under the sink is still attached. The bolt seems to inaccessible from inside the head. Other side of shower wall is the forward berth. Does anybody know how to access this bolt?




Rising Contributor

Welcome to the forum.

The forward berth wall might need to be removed to access the loose screw.

It might be a plywood panel, covered w/ padded fabric glued to the surface (similar to the headliner), retained to the boat w/ hidden screws around the perimeter.

If so, it is possible to locate those screws by feel, pushing into the padding. Once located, the padded fabric, currently tucked into the seam is pulled back. The padded fabric is glued onto the plywood, except at the screw locations.

Why not post an image of the wall on the other side of that handle?

Guest Contributor

Thanks for the reply. I was thinking the same but wanted other opinions before i start removing trim and padding from the forward berth.