I recently purchased a 1991 Sea Ray 260 OV that came with a relatively new sunbrella convertible top and cockpit cover. I tried putting the top up using the installation guide and could not get the top to snap in. The convertible snaps would not re...
Looking for advice on replacing the Clarion CMD5 on my 2006 290 SD. It's mounted in the cabin electrical panel along with all the AC/DC switches. I've removed the face screws from the Clarion unit and it will only pull out about a 1/2 inch, so the...
Hello all, hope all is safe... I am looking for a set of risers elbows with number 816900-C. Can someone tell me of a place they know that has these?.. Its the ones that are for the 7.4 and are stainless steel... thanks in advance..
Raw water cooled exhaust - required inspections These are the required inspections for boats like mine, that were built w/ raw water cooled exhaust and operated in salt water. My 2000 380DA w/ 454 MAG MPI Horizon engines had many undocumented mainten...
I have a 2017 DA 400. I think I have a stuck bobber on my gulper sump pump. Just got it to slip for summer. When I have it on shore power but turn on the "House" switch, I get a sound like a pump running in rear port area. DC Amperes dial keeps b...
Hi y'all, We have 2006 320 Sundancer with 350 MPI Horizon engines. Starboard engine stalls out slowly after running for 60 - 90 minutes. Fuel rail pressure drops from ~45psi down to 10 psi then 5 psi and stalls out slowly (takes 30 - 60 seconds to...
We have a 34' searay Sundance and a 9' carib with a 9.9 yamaha. Hurley davit h2o won't get dingy out of the water with engine on it even with big muscle men. Anyone have a davit that will work?
Mercury engine, keeps shredding serpentine belts. 4 different mechanics have not solved it. Appears to start walking at the water pump but have already changed that out, plus added new idler pulley. Have also used straight edge to align. Just checkin...
