Sport Yachts/Yachts
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

Help! Hoping you have tackled this...

Help! Hoping you have tackled this project Wingless! changing out the reading lights in the stateroom. What a pita. The fixtures are so small, the plug in connectors are above the ceiling. The one in the aft  was able to pull the wires and get the co...

Chris-380 by Guest Contributor
  • 1474 Views
  • 2 replies
  • 1 likes

This question pertains to a 2012...

This question pertains to a 2012 Sea Ray 450 Sundancer. I just noticed that the engine hours displayed on the Onan 13.5KW diesel generator shows 326 hours while the vessel view display at the helm shows 282 hours? Could this be due to running the gen...

I have a leak in the aft cabin...

I have a leak in the aft cabin of my 2018 SeaRay 400 Sundancer (see photo). MarineMax has removed ceiling panels and we had many rain storms with the shrink wrap off while on the hard without any leaking. No water or pink antifreeze leaking while com...

Having a hard time finding a place...

Having a hard time finding a place to learn and discuss the 470DA with other owners, so I figured I'd create a group. Come hang: https://www.facebook.com/groups/1065438874370023/

NoahsArk by Guest Contributor
  • 451 Views
  • 0 replies
  • 0 likes

My  2011 470 Sundancer needs a...

My  2011 470 Sundancer needs a new isotherm CRL195 refrigerator/freezer or at least service on it. Fridge is warm while freezer is cold. Has anyone had to remove the cherry trim surrounding the unit?  Trim must be removed in order to slide unit out t...

I have a 2016 510 that I got 2...

I have a 2016 510 that I got 2 years ago. Low hours but was a little neglected. The vinyl is cracking but the worst is the wear on the helm seat.  This seems excessive and I've heard that this was a recognized defect and that Sea Ray was performing r...

Pudge by Guest Contributor
  • 2163 Views
  • 6 replies
  • 0 likes

2004 390MY looking for specs on...

2004 390MY looking for specs on my props. Cummins 6CTA engines.Traveling up the Mississippi we picked up a vibration above 1900 rpm.  It is taking time to haul the boat out, so I'm considering buying a second set of props.22x22x1.75 or 24x27x2.0?Othe...

O_Fred by Guest Contributor
  • 2373 Views
  • 6 replies
  • 0 likes