Sundncer 2000 310 the cabin companionway door needs repair i can't find anything that lists all the pieces for the door. I think i'm missing sometype of hinge but not sure. Anyone have any ideas who I could contact to get a diagram or help with th...
2010 390 Sundancer My cockpit upholstery needs to be updated. I am looking for the best quality material as my boat sits exposed at the dock all year. I am looking for suggestions about what material is the best quality and manufacturers of the ski...
Hey gangA prop question. My boat calls for an 18in x 21.5 pitch for port, an 18in x 21 for starboard per my parts manual. Does the .5 difference in pitch make a difference in performance or RPM's?
2000 380Looking for a place to get a momentary switch for replacement of my port engine push button ignition switch on my dash.
In older SeaRay boats with twin engines (mine is a 1990 310 Sundancer, 454's) is one of the engines counter-rotational? If yes, is it normally the port or the starboard engine that is counter-rotational? Can one determine if an engine is standard-ro...
So here is (it seems) the epilogue to the generator saga. My 2015 350 SD has a Koehler 5EKD. The generator specialist informed me they discontinued this model after a judge ruled against them as they apparently reverse engineered this model and told ...
Does anyone have the Hurley H2O Davit System with the 10” Extension Mount, on a 36” Depth Swim Platform (380, 400, 410). I’m trying to figure out if I will have a decent 6” or so to step through between the Dinghy and Transom ? I have the 380 wi...
Hello everyone. I have a Sea Ray Sundancer 330 , year 2009, with 2 inboard-outboard 300 HP Mercruisers. The port engine needs a new Transom Bravo Axius assembly (Mercury part number 6-6345002TP). When the Mercury dealer where I took the boat for rep...
I have a 2016 Sundancer 340. I've got air bubbles in the fresh water system and think I've chased it down to the freshwater tank. I've replaced the fresh water pump and even shut off the manifold to see if it would pressurize the 2 feet of pex bet...
Hello everyone, newbie hoping for some guidance. I've just purchased a 2001 Sundancer 280 which I plan to leave in the water so that my family can enjoy cruising throughout the winter months. We live on the west coast, the boat will be in salt water,...
